|
|
|
|
Applied Object
|
Environment and
Specification
|
Coat system
|
|
|
| Oil tank
interior(crude oil, kerosine, gasoline, light
oil, heavy oil, engine oil, etc..) |
1. |
Common solvent system |
EPTANK361 High-build
primer and finish for oil tank interior |
| 2. |
Solvent
antistatic system |
1,ZIEP212
Epoxy zinc-rich primer and EPSP393 epoxy oil-resistant
antistatic anticorrosive paint |
| 2,ZIES213
Inorganic zinc-rich primer and epoxy phenolic
paints for oil tank |
| 3. |
Solvent-free
anitstatic system |
EPSP409
Solvent-free epoxy antistaic paints for oil
tank |
| Buried
pipeline under grund |
1. |
High performance system |
EPCT380 or
EPCT382(For winter)Epoxy coal-tar high-build paints |
| 2. |
No
glass-filment system |
EPSP391
Epoxy coal-tar glass flake high-build paint |
| Interior
surface of drinking
water, edible oil, beer storage tank and
pipeline |
1. |
Regular
system |
EPTANK362
Epoxy tank paint |
| 2. |
Solvent-free
system |
EPSP402
Solvent free epoxy tank paint |
| Water
sluice gate |
1. |
One
pack paint system |
Chlorinated
rubber or MP paints |
| 2. |
Heavy-duty
corrosion inhibiting, high-efficient system |
ZIEP212Epoxy
zinc-rich primer + epoxy intermediate paint +
epoxy finish |
| Chemical
sewage and drainage gutter, sewage tank, etc.. |
1. |
Steel or iron
substrate |
ZIEP202 Epoxy zinc-rich
primer + EPSP390 Epoxy glass flake paint or
EPSP391 epoxy coal-tar glass flake paint |
| 2. |
Concrete
substrate |
EPSP390
Epoxy glass flake coating or EPSP391 Epoxy coar-tar
glass flake paint |
Chemicals medium corrosive environment
1.Acid corrosive environment
|
Corroded Medium
|
Recommend anticorrosive
paints
|
Specification
|
Inorganic
acid
|
HCl( 37%)
(including wet chlorine) |
SPE901,SPE902,SPE903
flake paints |
<80 |
Rare
H2SO4
(including wet SO2 gas) |
EPTANK371
Acid, alkali resistant paints for oil tank,
SPP1201 chemicals resistant paints, SPE series
flake paints |
<50%
,<100 |
Medium
concentration H2SO4
(50-70%) |
<80 |
High
concentration H2SO4
(>75%) |
<49 |
| H3PO4
solution |
SPE
series flake paints |
<100 |
Hydrofluoric
acid
(<20%) |
SPE
series flake paints, Silo series composite silicon
paints.
|
<65 |
| Hypochlorous
acid(<20%) |
<65 |
| Hypobromous
acid(<20%)or bromine water |
<65 |
| (Chromic
acid 20%) |
<65 |
| Nitric
acid(<10%) |
<80 |
Organic
acid
|
Acetic
acid
(caproic acid) |
Modified
epoxy polyurethane paints, special type chemcials
resistant, paints, PE series flake paints, |
<60 |
| Trichloroacetic
acid |
<60 |
| Formic
acid(50%), formaldehyde |
<70
|
| O-hydroxybenzoic
acid, acrylic acid, maleic acid,oleinic acid,
1-dodecanoic acid, benzenesulfonic acid, citric
acid, phenol, etc.. |
PU418
flake paints, SPE flake paints, EPSP403 solvent
free paints |
Room
condition or below 60 |
2. Alkali environment
3.Salt medium
|
Corrosive medium
|
Recommend anticorrosive
paints
|
Description
|
NaCl solution
|
EPSP390 glass flake
paints, SPP1201 chemicals resistant paints,
PU paints
|
|
| Copper sulphate solution |
|
| Sodium sulfate solution |
|
| Soldium hypochlorite solution(17%) |
|
| Ferrous sulfate solution |
|
| Na2Cr2O7
solution |
|
4. solvent
|
Corrosive medium
|
Recommend anticorrosive
paints
|
Description
|
| Benzene(including toluene, ditoluene) |
EPTANK366 chamber
paints, Silo composite inorgainc silicon paints |
|
| Alcohol |
|
| Ether |
|
| Ketone |
|
| Solution petroleum |
|
¡¡ |
| CCl4 |
|
| CH2C12 |
|
| dimethyl acidamide |
|
| Ethylene trichloride |
|
5. chemicals sewage
|
Corrosive medium
|
Recommaned anticorrosive
paints
|
Description
|
| Black
liquide in paper factory |
CR112
rubber paints, SPP1201 chemicals resistant
paints, EPSP390 flake paints
|
|
| electrolytic
liquid |
|
| chemical
sewage cell of the power plant |
|
| FeSO4
waste liquid |
|
6.Insecticides
|
Corrosive medium
|
Recommaned anticorrosive
paints
|
Description
|
| Copper sulphate
pentahydrate |
EPE336
high-solid finish, SPE flake paints, PU paints,
Silo composite silicon paints
|
|
| 25%DDT emulsion |
|
| 90% insecticide
crystal |
|
| 80% insecticide
emulsion |
|
| Lime-sulfur |
|
|
|
|
|
